7.
Scope of delivery
AQLT0093 AQLT0094 AQLT0095
1
–
–
1
1
1
2
1
1
8.
Dimensions
9.
Installation example
10. Assembly
Warning!
Only operate the fitting with non-return valves and the specified filters.
Failure to observe this instruction can result in an increased germ load in the
drinking water and thus pose a health or mortality risk.
☞
Important!
Prior to the assembly process, flush the pipework in accordance with DIN 1988.
10.1 Remove the wall protection.
10.2 Use an Allen key to close the water volume regulators.
a: closed
b: open
10.3 Open the locking screws (c) of the water quantity regulators (d).
☞
Important!
Note the installation position of the filters (e).
10.4 Insert the filters (e).
10.5 Screw in the locking screws (c).
Caution!
Use an open-ended wrench to hold the water quantity regulators (d) in position while
turning the cap nuts (f).
tightening torque: 1 Nm
10.6 Remove the T-type flush connector (g) and any seals that are present.
6
1
1
1
1
–
1
1
1
1
1
1
2
2
1
1
1
1
1
Name
AQUALINE-THERM DN15 self-closing
thermostat battery
Thermal disinfection option
Automatically emptying shower pipe
Frame with profile seal
Cover plate
Push-on rosette
Bag with filters and seals
Bag with attachment materials
Installation and operating instructions