Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
Always
wear
safety gog-
gles complying
with ANSI
Z87.1
(or in Canada,
CSA Z94.3)
before
using as a blower.
WARNING:
To reduce
the risk of injury
to bystanders,
keep them
clear
of
blowing
debris.
CAUTION:
To reduce
the risk of hear-
ing damage,
wear
ear protectors
when
using the vac/blower
for extended
hours
or when
using
it in a noisy
area.
WARNING:
Wear a dust mask if blow-
ing creates
dust which
might
be
inhaled.
1. Locate
blowing
port of your vac.
2. Insert
the locking
end of the "Pos-I-
Lock"
hose into the blowing
port of the
vac. The hose
should
snap into place.
To remove
the hose from the vac,
press the release
button
in the hose
assembly
and pull the hose
out of the
vac inlet.
3. (Optional)
Attach
extension
wand to
opposite
end of hose.
4. Turn vac on and you are ready
to use
your vac as a blower.
Craftsman
recommended
accessories
are
available
at Sears
retail stores.
The
Sears
Blower
Nozzle
Stock
No. 9-16933
is recommended
for blowing
debris.
Locking
Hose
End\
g Port
Extension
Wand
(Optional)
Maintenance
Cleaning
Vac Filter
WARNING:
To reduce
the risk of injury
from accidental
starting,
unplug
power
cord before
changing
or cleaning
filter.
NOTE:
This filter is made
of high quality
paper
designed
to stop very small
parti-
cles of dust. The filter can be used for
wet or dry pick up. Handle
the filter care-
fully when
removing
to clean or installing
it. Creases
in the filter pleats
may occur
from installation
but creases
will not affect
the performance
of the filter.
Your filter should
be cleaned
often to
maintain
peak vac performance.
Be sure to dry the filter
before
storing
or
picking
up dry debris.
IMPORTANT:
After cleaning,
check the
filter for tears
or small
holes. Do not use
a filter with holes or tears
in it. Even a
small
hole can cause a lot of dust to
come
out of your vac. Replace
it immedi-
ately.
Filter
Removal
To remove
the filter for cleaning
or
replacement,
unscrew
the filter nut from
the filter cage,
remove
filter plate and lift
off filter.
IMPORTANT:
To reduce
the risk of dam-
age to the blower
wheel
and motor,
always
reinstall
the filter before
using the
vac for dry material
pickup.
11
Publicidad
Tabla de contenido
