Unpacking Instruction - Fenton KMD55 Serie Manual De Instrucciones

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
SAFETY INSTRUCTIONS
•
Tapping or dropping the microphone can permanently damage your microphone.
•
Resist the urge to swing the microphone around by the cord!
•
Warning - To avoid microphone feedback do not hold the microphone too close to the speaker.
•
If the brightness is glaring, turn on room lights or turn off LED light show
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device.
CONNECTING AND USING THE MICROPHONE
Connect the microphone plug to a 6.35mm (1/4") jack microphone input.
Microphone on/off
To turn the microphone off, you can press and slide MIC On-Off switch to OFF.
Microphone light
LED disco lights on the front of the microphone grip synchronize to music/ voice or use it in random selection modes.
•
RANDOM FLASH ON, press LIGHT SHOW button.
•
RAVE or LIGHT ON, press LIGHT SHOW button again
•
MUSIC FLASH ON, press LIGHT SHOW button again.
•
To turn off the LED light show, press LIGHT SHOW button again.
Note: If the brightness is glaring, turn on room lights or turn off LED light show.
1. Light show
2. Microphone ON / OFF
3. Battery compartment
3
ENGLISH