Description And Operation - König Electronic SEC-DVRSG10 Manual De Uso

Sunglasses with Camera/DVR
Introduction:
The SEC-DVRSG10 combines sunglasses with a built-in hidden camera and
microphone for recording on a Micro SD card (not incl.). It is ideal for security
purposes. They can be used by security personnel to record evidence, but they are
also a great product for sports, like skiing or cycling.

Description and operation:

1. Microphone.
2. Operation LED indicator.
3. Micro SD card slot. Insert the Micro SD card in the slot, in the position as shown
in the image.
4. USB connector. Connect the sunglasses with a USB cable to a
computer/notebook to transfer the files or for charging the rechargeable battery.
Ensure that the sunglasses are turned off before connecting.
5. ON/OFF indicator. The indicator lights up red when the power is on. The LED
indicator flashes when no Micro SD card is inserted or the Micro SD card is
defective.
6. Reset button. Push the reset button when the operation is not correct.
7. ON/OFF button. Press lightly to power on the sunglasses; the ON/OFF indicator
lights up. Press again to take a photo. The operation LED indicator lights up
green to indicate that the photo is being taken. The red ON/OFF indicator goes off
momentarily and goes on again after the photo has been taken.
8. RECORD/PAUSE button. Push this button after the sunglasses have been
powered on, to start video recording. The operation LED indicator starts to flash
green during video recording. The ON/OFF indicator goes off during this period.
Push the button again to stop video recording. The operation LED indicator stops
flashing.
9. Camera lens.
Note: the video and photo files are stored in the folder DCIM.
Settings:
Set the date and time. Connect the sunglasses with a USB cable to a computer or
notebook. Be sure the Micro SD Card is inserted.
- Select "open folder to view files" in the window.
- Create a text file in the folder. The text file must be named time.
- Open the text file and enter the current time and date in the YYYY.MM.DD
HH:MM:SS format (for example: 2011.05.09 13:46:00).
- Save the file.
ENGLISH
2