Vogel's PPA-350 Instrucciones De Uso página 3

ENGLISH
Four Button Infrared Remote – Instructions for use
Projector Lift Version
Operation
When power is applied to the control box the IR Remote will boot up. The green LED will blink 20 times. The Red LED provides projector
lift codes. Consult the Projector Lift Manual for LED lift codes.
The IR remote will default to automatic mode (Up, Down, Stop). Basic functions (UP, DOWN, STOP) activate by pressing the button
for 1 second.
NOTE: For accurate programming of lift show and service positions we recommend using the hardwired remote provided with the lift.
The electronic Lower Limit cannot be reset with the IR Remote.
UP
STOP
DOWN
HIDDEN
Basic Control
Function
Go to Home position (all the way up)
Go to Show position (1st programmed position)
Stop Movement
Go to Service Position (2nd programmed position)
Enter Manual Mode
Button
UP ARROW
DOWN ARROW
STOP Button (Red)
Hold HIDDEN for one second, release,
then press and release DOWN
Press HIDDEN for 5 seconds, release,
then press STOP for 5 seconds (Green LED will blink slowly)
1