VelLight LEDC06 Manual Del Usuario página 7

(alkaline). Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
6. Technical Specifications
input voltage: 12–24 VDC
Output current of power supply must not exceed 6 A.
Suitable power supplies: 70 W / 12 V or 140 W /
24 V. The output voltage must be equal to the rated
voltage of the LED strip.
maximum load: 3 x 2 A
PWM frequency: ± 500 Hz
dimensions: controller 50 x 35 x 22 mm;
IR remote control: LEDC06 85 x 51 x 7 mm,
LEDC07 125 x 56 x 7 mm
weight: controller ± 30 g; IR remote control:
LEDC06 ± 19 g, LEDC07 ± 35 g
power supply: remote control 3 V lithium CR2025
battery, incl.
Use this device with original accessories only. Velleman
nv cannot be held responsible in the event of damage
or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest
version of this manual, please visit our website
www.velleman.eu. The information in this manual is
subject to change without prior notice.
© COPYRIGHT NOTICE – The copyright to this manual
is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced,
translated or reduced to any electronic medium or
otherwise without the prior written consent of the
copyright holder.
V. 01 – 05/11/2013
LEDC06/LEDC07
7 ©Velleman nv