SCANGRIP CANVIK BASIC Instrucciones De Uso página 7

Maintenance and Cleaning

Always keep the unit clean.

For all inquiries and spare parts ordering, please include the serial
number in all cases.

Grease the guide spindle if necessary, however at least every six
months. Clean the spindle before greasing.
Recommended grease: graphite grease.
Replacing the Safety Pin, Fig.C.5

Overloading of the spindle will result in the safety pin breaking.
Whilst the drive nut will still rotate, the spindle remains in its last po-
sition ensuring the spring remains compressed. Replace the safety
pin as described.

Drive out the broken pin with a drift pin.

Align the drilling of the spindle and the drive nut and drive in a new
safety pin (5x26 mm, ISO13337).
Guarantee
This tool carries a guarantee according to current law.
NOTE: Find the latest APPLICATION CAR LIST on our
Subject to change without notice
website: www.scangrip.com