OXO tot Splash & Store Manual De Instrucciones página 3

WARNINGS
!
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING
!
Drowning Hazard: Babies have drowned while using
infant bath tub.
To prevent drowning:
• Stay in arm's reach of your baby.
• Never rely on a toddler or preschooler to help your
baby or alert you to trouble. Babies have drowned even
with other children in or near bath tub.
• Never leave your baby unattended in the bath, even for
a few moments. If you need to leave the room, take the
baby with you.
• Babies can drown in as little as 1 inch (2.5 cm) of water.
Use as little water as possible to bathe your baby.
• Use in empty adult tub.
• Keep drain open in adult tub.
• Never place this product in water in an adult bath tub.
Fall Hazard: Babies have suffered head injuries falling
from infant bath tubs.
• Place tub only in adult tub or on the floor.
• Never lift or carry baby in tub.
To prevent falls:
• Place tub only in adult tub or on the floor.
• Never lift or carry baby in tub.
• Never use infant tub on a raised surface.
CLEANING & MAINTENANCE RECOMMENDATIONS:
• Do not use harsh chemicals to clean tub surfaces. Bleach may damage the soft surface.
• Before first use and after each use, clean with a soft cloth using warm water and mild soap. Allow tub to fully dry
before collapsing for storage.
• Do not unscrew legs or hook components.
• Watch for sharp objects around the tub.
• Before each use, inspect the tub to be sure that all parts are correctly positioned and locked.
• Do not hang other items such as towels, cleaning items or toys off of the bath tub while hanging.
• Do not use overstretch drain plug.
• Ensure drain plug is fully secured before filling tub.
• Children have drowned while bathing.
• Children can drown in as little as 2cm of water in a very
short time.
• Always remain in contact with your child during bathing.
• Babies and young children are at risk of drowning
whenbeing bathed.
• Never use this product on an elevated surface not
intended for this product. A list of compatible elevated
surfaces (e.g. stands) shall be provided as applicable.
• To avoid scalding by hot water, position the product in
such a way to prevent the child from reaching the source
of water.
• Always check the water temperature before bathing the
child.
• Typical water temperature for bathing a baby should be
between 90 and 100°F (32.2 and 37.8°C).
• Always check the stability of the product before use.
• Do not use the product if any components are broken or
missing.
• Do not use replacement parts or accessories other than
those approved by the manufacturer.
• This is not a toy.
4
INSTRUCTIONS:
Flip Bathtub upside down
1
and unfold legs. Legs will
click and lock into place.
Note: Before each use, test
legs to make sure there's no
gap and that the leg has
snapped into place.
2
Place Bathtub in empty
3
adult bathtub. Add as
little water as possible to
Bathtub. Always check
temperature before placing
baby in tub. Typical water
temperature for bathing a
baby should be between
90 and 100°F (32.2 and
37.8°C).
Flip Bathtub over and
5
press on either side of
drain to flatten.
Note: Don't press
directly on drain to
avoid dislodging it.
Swing hook out for
7
hanging storage.
Flip Bathtub over. Press down
2
on support post to expand
1
Bathtub.
Note: Check to make sure
drain stopper is securely
sealed before each use.
2
After bathtime is over, use
4
1
either tab to lift drain stopper
and drain the Bathtub. Fully
remove drain and stopper for
quick drying.
To replace drain, press both
tabs down into Bathtub.
2
3
3
Flip Bathtub upside down.
6
Press buttons on legs and hold
in as you fold legs inward.
2
2
1
1
1
The narrow end of the tub
is perfect for newborns
and smaller infants to help
support them. The wider
end is ideal for babies who
can sit up on their own.
5