Scope Of Application; Device Elements - Buhnen HB 350 Instrucciones De Servicio

GB
1 General
Before first operating the HB 350 adhesive pistol, please read this operating
manual carefully and thoroughly through. Please pay special attention to the
safety information in chapter 2.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "nozzle (1)") apply
to the figure on page 2.
1.1

Scope of application

The HB 350 is intended for use with hot-melt adhesive in candle form
(correct intended use).
Any other usage is unauthorized.
1.2 Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Operating pressure [bar]
Air consumption [l/h]:
Working temperature [°C]
Controller
Adhesive
Adhesive performance [kg/h*]
* depending on temperature and adhesive viscosity
1.3

Device elements

1 Melting nozzle
2 Adjusting screw for discharge
speed
2a Counter nut for adjusting screw (2)
3 Stand
4 Trigger
5 On/Off switch
6 Power cable
7 Compressed air connection
(plug nipple)
HB 350
adhesive pistol, screwdriver, maintenance unit,
instruction handbook, spare nozzle
330 x90 x 250
850
220...240, 50 Hz
600
1
IP20
5...7
max. 1.65
140...230, preset to 180...190
bimetallic temperature regulator
BÜHNEN hot-melt adhesive in candle form,
Ø 18 mm
1.2...1.8
8 Adjusting screw for discharge
amount
8a Counter nut for discharge amount
9 Insulating sleeve
10 Screwdriver (included in delivery)
11 Temperature adjusting screw
12 Operating pressure setting
13 Compressed air supply connection
(plug nipple)
14 Operating pressure display
9
General