Cleaning The Condenser - IARP A+660 N Instrucciones De Empleo Y Manutención

INFORMATION FOR CUSTOMER SERVICE

CLEANING THE CONDENSER

Regularly clean the static condenser of impurities (dust and debris) that
accumulate in between the wires and the pipes, hindering good air circulation.
If the condenser is dirty, it adversely affects the yield of the system, with a
detrimental effect to performance and causing unnecessary consumption of
electricity.
The cleaning must be done with bristle brushes or, even better, with an extractor
fan.
TROUBLESHOOTING
The operating problems that occur in the refrigerating appliances are due, in most cases, to minor
causes or faulty electrical installation. Therefore, they are causes that can be eliminated easily on site.
The appliance does not work:
- Make sure that the current reaches the socket;
- Make sure that the plug is properly plugged into the socket.
The internal temperature is not low enough:
- Make sure that the appliance is not located near a heat source;
- Make sure that there is no excessive ice build-up on the walls;
- Check the temperature adjustment;
- make sure that at the back of the appliance there is enough space for air circulation.
The unit is noisy:
- make sure that all screws and bolts are firmly tightened;
- make sure that the unit is level;
- make sure that no pipe or blades of the fans is in contact with other parts of the appliance.
-18-