Features; Assembly - Homelite UT44110 Manual Del Operador

PRODUCT SPECIFICATIONS
UT44110
Cutting Capacity........................................................ 3/8 in.
Total Blade Length...................................................... 17 in.
Cutting Strokes Per Minute ........................................ 3,20.0.
Input ....................................... 120. V, AC only, 60. Hz, 2.7 A
Weight ..................................................................... 4.6 lbs.
KNOW YOUR HEDGE TRIMMER
See Figure 2.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE COVER
The blade cover keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-80.0.-242-4672 for assistance.
PACKING LIST
Hedge Trimmer
Blade Cover
Clipping Deflector (UT44121 only)
Deflector Retainer (UT44121 only)
Operator's Manual

FEATURES

FEATURES
UT44121
Cutting Capacity........................................................ 1/2 in.
Total Blade Length...................................................... 22 in.
Cutting Strokes Per Minute ........................................ 3,20.0.
Input ....................................... 120. V, AC only, 60. Hz, 3.7 A
Weight ..................................................................... 5.5 lbs.
CLIPPING DEFLECTOR
When installed, the clipping deflector makes removal of cut
debris easier.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during trimmer operation.
GUARD
The guard helps to deflect chips or other debris away from
the operator's hands.
SWITCH TRIGGER
The switch trigger, located beneath the rear handle, and the
lock-out button, located behind the front handle, must be
depressed simultaneously to allow blade rotation.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Page 7 – English
(MODEL UT44121 ONLY)