iCES IMP-100 Manual Del Usuario página 5

st
B. 1 Time Use
The Player has an internal, non–user-replaceable rechargeable lithium battery. For
best results, the first time you use the player, let it charge for about 2 ~ 3 hours or
until the charging LED shows a constant red light.
Important: The player may continue to use battery power after it's been turned to
standby off mode, if the unit isn't used for a while it will need to be recharged. For
longevity of the lithium battery life, we recommended to recharge the battery at
least once per month.
C. Charging Mode
You can recharge the Player's battery in two ways:
1. Connect the player to your computer. Or,
2. Use a USB power wall charger. (not included)
3. The Status LED will blink
4. When the battery is fully charged, the Status LED will switch to a constant
light.
D. PC Connection Mode
1. Connect the player to a computer
1.1 Connect the player to a Windows OS computer with the USB cable, then
"USB Mass Storage Device" is detected and the related driver is installed
by your computer. A removable disk drive will display in the "My
computer" folder where the user can operate Read and Write functions.
And the battery will charge in the background. (for Windows 2000/XP
System or above)
1.2 Or, connect the player with a MAC OS computer, then an "Untitled" icon
will display on the desktop indicating the player is a removable disk, the
user can operate Read and Write functions. And the battery is charging in
the background. (For Mac System 9.2 or above)
Note:
 In USB power charger or PC connection mode, the player can play music if you
press the
 The player may go into music playing mode automatically and can only pause
or play the music, not power off.
2. Remove the player from a computer:
Note: Please safely remove the player when connected to the computer, otherwise,
the data stored in the Player might be lost.
2.1 If you're using a Windows OS PC, you can disconnect the player in My
Computer or by clicking the "Safely Remove Hardware" icon in the
Windows system tray.
red when the USB power source is connected.
button.
5
red