User Manual
EN
FireWare Nimbo
7.
After Care
To maintain the performance of the FireWare Nimbo, it should be properly maintained.
•
Make sure the fluid tank is clean at all times.
•
Clean the machine on a regular basis. You can clean the outside with a moist
cloth and mild detergent. You can keep the inside of the device clean by flushing
it with demineralised water (see the procedure below).
•
Let op: it is not necessary to clean the nozzle. That could damage the heating
element.
•
Flush the FireWare Nimbo regularly, using the following procedure:
Flushing
If you won't be using the FireWare Nimbo for a long time, remove the smoke fluid from the smoke
generator and rinse it with demineralised water. To do this the following procedure should be
followed:
•
Place a funnel on the smoke fluid can and empty the smoke machine tank by toppling it.
•
Fill the tank with demineralised water (use a funnel) and switch on the smoke machine.
•
Wait until the red indicator light burns continuously and generate smoke by pushing the
•
Continue to generate smoke until the machine no longer releases smoke/mist.
•
Remove any possible water residue from the fluid tank.
Repeat this flushing procedure at least once every six months.
8.
Waste disposal
Electric appliances, accessories and packaging need to be collected and recycled separately or
disposed off in an environmentally responsible manner.
9.
Warranty provisions
The FireWare Nimbo has a two-year warranty against product and manufacturing faults.
Damage as a result of careless acting is not refunded. Repairs require expertise. It is therefore highly
recommended to return the appliance to us in the event of a defect. The warranty is cancelled if
it becomes apparent that you or a third party opened the appliance or if you or a third party have
applied modifications or adjustments of any kind without the explicit permission from the supplier.
20
FireWare Nimbo
button on the handle or the remote control.
www.FireWare.nl