Mx Onda MX-VC2640 Manual De Usuario página 129

Setting the timer to turn one cooking zone off
1. Touch the "-" or "+" control of the heating zone
that you want to set the timer for.
2. Touch the "-" or "+" control of the timer, the minder
indicator will start flashing and "00" will show in the
timer display.
.
3. Set the time by touching the control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer will
decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. Touching the "-" or "+" of heating zone, then touch the "-" or "+" controls of the
timer, and scrolling down to "0", the timer is cancelled, "00" will show in the
minute display, then and then "--".
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
14