Renz DTP 340 M Instrucciones De Servicio página 10

6. Material to be punched
1. Do not punch material that is too thick. Never punch metal or thick plastics.
2. Do not use the machine for purposes other than punching, it may be damaged.
7. Trouble shooting
In case of malfunction, please check the following points before calling for service:
The machine does not work:
• Is the main switch turned on?
• Is the electric plug connected correctly?
• Is power supplied to the outlet?
• Is the fuse defective?
(The fuse is located on the right side of the machine, below the main switch).
CAUTION: Please do not attempt to repair the machine. Return the machine to Renz indicating the problem.
Warranty:
12 months under normal operating conditions.
Company address:
Chr. Renz GmbH & Co., Rechbergstrasse 44, D-73540 Heubach, Germany.
Phone +0049 (0) 7173/186-0
Fax +0049 (0) 7173/37 20
• INTERNET HTTP: //www.renz.com
• eMail: renz-germany@t-online.de