Description Of The Device; Operation; Energy Saving Tips - Coca-Cola Mini Fridge F15 Instrucciones De Uso

Cool Can10
The cooling device always cools with maximum cooling capacity.
5.1

Description of the device

Connection sockets and control panel (rear of the device):
Item in
Designation
fig. 2, page 4
1 AC voltage socket
2 DC voltage socket
3 Mode switch
4 LED "HOT" (red): indicates heating mode
5 LED "COLD" (green): indicates cooling mode
6 ECO switch (only Mini Fridge F 15, Mini Fridge 25)
7 Voltage selector switch (only Mini Fridge 25, Cool Can 10)
6

Operation

I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 13).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
6.1

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler device, use the device's ECO mode.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
EN
11