Troubleshooting; Cleaning And Storage; Repairs - Rave Sports Aqua Buddy Manual Del Operador

Troubleshooting

Air chamber(s) won't hold air:
• Check stem valves to ensure plugs are fully seated down into the
valve body.
• Check for holes in bladder following the procedures in the
"Repair" section.

Cleaning and Storage

 When the inflatable product is not being used, we recommend
that you store it in a covered, shaded area. This will help protect it
against ultraviolet (UV) rays and extend the life of the product.
 Clean the inflatable completely with a mild soap and fresh water.
NEVER USE PETROLEUM BASED PRODUCTS OR SOLVENTS
FOR CLEANING.
 Product should be completely dry and remain dry while stored.
 Roll the product loosely and place in a vented storage bag or
container.
 Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.

Repairs

For minor holes or tears:

Inflate the tube and locate the leak by spraying the tube with
soapy water. Bubbles will appear where there is a leak.

Determine the hole size and cut a circular patch ½ - 1 inch wider
than the hole.

Remove air from the tube and dry tube completely where the
patch is to be applied.

Peel off paper back from patch, apply repair patch to area and
work out any air bubbles from beneath the patch.

Apply weight to the patched area for one hour before re-inflating.
13