Preventing Property Damage - Schluter Systems Liprotec LT EKE 24V15W Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
EN
Safety
Protect the components from moisture.
Do not install damp components.
Comply with the regulations for electronic devices applicable at the place of use.
Comply with the component's protection classes.
Observe the DIN VDE 0100 series of standards when installing the components.
Comply with the scopes of protection according to DIN VDE 0100-701. Observe
the country-specific deviations and the locally applicable regulations.
Possibility of electric shocks when installing components with damaged insulation.
Mechanical loads may damage the components. Protect the components from
mechanical loading and damage. Do not use any damaged components.
Only open the components' housing at the points indicated. Do not use force.
Possibility of electric shocks due to incorrectly connected cables.
Only connect cables using the terminal connectors provided.
Screw the power pack down to the power pack's mounting straps.
Make sure that the cable is laid with strain relief.
Possibility of deadly burn injuries or smoke inhalation if incorrectly mounted
components ignite.
Make sure that all components are mounted correctly.
Observe the minimum distances between adjacent components specified in these
instructions.
Make sure that the components and the connection cables are sufficiently
ventilated.
Do not use cables when they are rolled up.
Use removable panelling for the components.
2.3.2 Preventing injuries
If dropped down, heavy components cause bruising.
Wear safety shoes.

2.4 Preventing property damage

Damage and malfunctions are possible from work incorrectly carried out.
Make sure that all other work on mains connections and power packs is performed
only by qualified, expert personnel.
Make sure that all other work on components is performed only by qualified, expert
personnel.
Improper maintenance may cause damage.
Only clean components with a soft dry cloth.
20
Directions for use for the power pack

Publicidad

Tabla de contenido
loading

Tabla de contenido