Playing Audio From An External Device - Marantz professional PMD-526C Guia Del Usuario

Playing MP3 Files on a CD
To play MP3 files on a CD:
1. If the unit is off, press the Power button to power it on.
Important: Do not insert a CD when the power is off. Doing so may damage the unit. When powering on the unit,
hold the Eject button to engage Force Eject Mode.
2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not to
trap your fingers when the disc is drawn into the unit.)
3. Select CD as your desired media type: (described in Selecting the Media Playback Mode).
4. Select an audio file:
•
To move through audio files, press the |<</<< and >>/>>| buttons.
•
Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g., 1 then 2 for Track 12).
In CD Mode, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To stop playback, press the Stop button.
•
To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
•
To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One
track will repeat indefinitely), Repeat All
will repeat).
•
To select the Play Mode, press the Random button. It will cycle through Random
random order [for up to 256 tracks]), and Single Play () (the current track will play until its end and then stop).
•
To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time
has elapsed of the current track), Remaining (how much time remains of the current track), Total Elapsed Time
(how much time has elapsed of all remaining tracks), and Total Remaining (how much time remains of all
remaining tracks. This applies only to CDs.)
•
To eject a CD, press the Eject button. Ejecting will appear in the display while ejecting the CD. No Disc will
appear when there is no disc in the CD slot.

Playing Audio from an External Device

To play audio on an external device (e.g., smartphone, computer, portable music player, etc.)
connected to the Aux In:
1. If the unit is off, press the Power button to power it on.
2. Connect the 1/8" (3.5 mm) stereo/headphone output of your external device to the Aux In.
3. Select Aux as the media type (described in
device is connected, AUX Connected will appear in the display. If your external device is not
connected, AUX Disconnect will appear in the display.
4. To start playback, press the Play button on your external device.
Important: All buttons except for Power, CD/AUX/USB/BT/SD, and Eject will be locked/disabled.
10
(the list of all tracks will repeat indefinitely), and Repeat Off (no tracks
Selecting the Media Playback
(the same
(the tracks will play in a
Mode). If your external