Installation Location Requirements; Connecting The Appliance - FLORABEST FBC 7 B2 Instrucciones De Uso

Installation location requirements

For the safe and trouble-free operation of the appliance, the following requirements must be met at the
installation location:
■ The temperature of the water fl owing through it may not exceed 40°C.
■ Use only clean fresh water.
■ Connect the appliance vertically, with the hose connection at the bottom.
■ Minimum operating temperature +5°C.

Connecting the appliance

GB
MT
CAUTION
The irrigation computer may only be connected to a drinking water outlet with a protective appliance
that complies with at least type HD according to EN 1717 (backfl ow preventer with pipe ventilation).
► Suitable adapters are available from specialist shops.
NOTE
► The appliance is equipped with a union nut
The adapter
If leaks/leakages occur when using the adapter
thread of the water tap.
♦ Insert the sieve
♦ For 26.5 mm threads (G ³⁄₄"): Screw the adapter
♦ Screw the union nut
♦ Screw the connecting piece
connecting piece.
♦ Open the water tap.
54
is used to connect the appliance to water taps with 26.5 mm thread (G ³⁄₄").
12
into the union nut as shown on the fold-out page.
11
onto the thread of the water tap or the adapter.
onto the hose connection
13
for water taps with a 33.3 mm thread (G 1").
, wrap some Tefl on sealant tape around the
12
to the water tap.
12
9 . A hose can then be connected to the
FBC 7 B2