Bionaire BAP001X Manual De Instrucciones página 5

captured by the filter system.
IMPORTANT NOTES:
Your ioniser may produce an occasional popping or
cracking sound. This is normal and occurs when a
small buildup of ions is discharged.
After extended use, you may notice dust around the
grilles or front panel.
• This is caused by negative ions exiting the air
outlet, evidence of the ioniser's air cleaning
effectiveness.
• You can remove the dust with a soft brush
or clean, damp cloth. Larger particles may
be attracted to positively charged surfaces
throughout the home, like walls or floors.
• This may occur more frequently when the filter
is nearing the end of its useful product life and
unable to capture as many charged particles.
• Excessive amounts of pet dander, dust, or
smoke may decrease the life expectancy of the
filters and interfere with the ionisation process.
To help prevent particles from attracting to surfaces
throughout your home:
• You may want to run the ioniser function less
often.
• Check the condition of the filters more
frequently.
• Always clean the filters at the recommended
intervals (See CLEANING THE FILTERS).
Using the ioniser with dirty filters may result
in dirty particles exiting the air purifier and
attracting to walls, carpets, furniture, or other
household objects. These dirty particles may
prove difficult to remove.
CAUTION: The levels of ozone produced by the
ioniser in this appliance fall within the recommended
safe limits. However, in high concentrations, ozone
can be harmful to birds and small pets. To prevent
ozone buildup when using the ioniser mode, operate
the appliance in a well ventillated area.
HEPA-TYPE FILTER
HEPA-type (High Efficiency Particulate Air) filters
are designed to remove up to 99% of airborne
pollutants, at 2 microns or larger, from the air that
passes through them. These include tobacco smoke,
household dust, pet dander and pollen.
UV LIGHT
Ultraviolet light is a proven technology used to
destroy various types of bacteria, viruses, fungi and
mould spores and is commonly used in hospitals and
commercial settings. This air purifier uses a UV-C
bulb.
PHOTOCATALYTIC OXIDATION
Photocatalyic oxidation (PCO) is achieved when
you combine UV light with a Titanium Dioxide (TiO2)
coating. PCO removes Volatile Organic Compounds
(VOCs) and odours which include harmful pollutants
such as formaldehyde, ammonia, toxic fumes and
chemicals such as paint and many other common
contaminates released by building materials and
household cleaners.
PRE-OPERATING INSTRUCTIONS
• Carefully unpack your air purifier.
• Select a firm, level surface with no obstructions
to the air inlets or outlets.
OPERATING INSTRUCTIONS
DO NOT POINT FILTERED AIR OUTLET
TOWARDS WALL. DO NOT USE THE IONISER
FOR LONG PERIODS OF TIME AS THIS CAN
CAUSE BLACKENING OF WALLS IF THE FILTERS
ARE NOT CLEANED REGULARLY.
To operate your air purifier:
1. Press the on/off button
turn on at the maximum fan speed (5).
2. Select the desired fan speed (5, 4, 3, 2 or 1)
by pressing the fan speed select button
display will show the selected speed.
Ioniser/UV mode
The ioniser and UV features can be selected
individually or both together. They will operate at any
selected fan speed.
1. Press the UV/Ionic mode selector button
select UV and ioniser, UV only, ioniser only or
none. The display will show the selected mode.
Note that the illuminated strip
when the UV feature is selected.
Timer Mode
You can set the timer so that your air purifier
automatically turns off when the desired time has
elapsed:
1. Press the timer select button
the desired number of hours you want the unit
to operate (1, 2, 3, 4, 5, 6, 7 or 8 hours).
2. The number of hours selected and the timer
active icon
J
3. When the time has elapsed, your air purifier will
turn off.
To cancel the timer, press the timer select button
5
. Your air purifier will
F
will light up
M
until you reach
C
will be shown on the display.
. The
E
to
D
C