Connection - Kenwood KDC-X398 Manual De Instrucciones

Wiring connection
Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) (B 10)
White
White/Black
Light blue/yellow
Gray
(Steering remote
Gray/Black control wire)
Green
Light blue/yellow
Green/Black
(Marine remote
control wire)
Purple
Purple/Black
Blue/White
(Power control wire)
Red
(Ignition wire)
Brown
Yellow (Mute control wire)
(Battery wire)
Blue
(Antenna control
wire)
If no connections are made, do not let the wire
come out from the tab.
To the steering wheel remote control
adapter
KMR-D358
For :
To Kenwood Wired Marine Remote Control
unit (optional accessory)
For the latest information on marine
accessories please go to:
http://www.kenwoodusa.com/Car_
Entertainment/Marine/
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation system,
refer your navigations manual.)
(Not used)
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH | 17