A) Dynamic Dns Setup - Fermax LYNX Manual De Instalador

L L L L L YNX R YNX R YNX R OUTER OUTER
YNX R YNX ROUTER OUTER OUTER
L L L L L YNX R YNX R YNX ROUTER YNX R OUTER OUTER OUTER
YNX R OUTER

a) Dynamic DNS setup

Mobile agents must have access to the internal network using the VPN hub. They have to
know the public IP address of the LYNX system. The public IP is provided by the ISP and
this can change over time. The Lynx Router has installed a dynamic DNS client for solve
the problem. It is necessary to configure correctly the Lynx Router with the server data. The
next screen shows the dynamic DNS options.
• Protocol: The protocol to refresh de IP in the server (noip, dyndns 1 or 2).
• Server: The IP o server name of the public DNS server.
• Username: username for this Lynx Router instance.
• Password: password for this Lynx Router instance.
• Domain name: The domain name for this Lynx Router instance.
In order to configure the dynamic DNS the installer must run the script "DDConfigurer" in
the same PC connected to the router LYNX. The PC must be connected to Internet. This
script will
- Register the router in the Dynamic DNS service. The server generates a unique name for
the router.
- Register the Dynamic DNS information and the unique name inside the configuration
file of the Lynx Router (changes will be refreshed in the attached screen).
Note: The script "DDConfigurer" can be downloaded in www.fermax.com.
Pag 8