Technical Features - Pressfit PUMA-RR Manual De Uso

Explanation of symbols/text on tool labels (Fig. c):
Examples of side labels:
Read instructions in this manual before using the tool.
KEEP THESE INSTRUCTIONS: this manual contains impor-
tant tool safety and operating instructions for correct
use.
Keep your hands away from the pressing jaws during
tool operation!
Always wear eye protection.
Do not dispose of this equipment with ordinary
household waste! This equipment must be disposed of
in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU for proper processing
and recycling.
Mark of compliance with European safety standards.
Examples of battery compartment label:
17RP682: tool serial number
2017 - 410: year of manufacture - fi rmware version
Explanation of symbols used in this manual:
Failure to comply with this instruction may lead to serious
physical injury.
Failure to comply with this instruction may cause damage to
the equipment or lead to operating errors.

1. TECHNICAL FEATURES

- Tool:
Pressing jaws series STANDARD
Nominal pressing force
Weight 3,0 kg (PUMA-RR)
(tool with battery)
2,9 kg (PUMA)
Direct current motor
Temperature of use
Safety
Recommended oil
(1)
L = 63.6 dB (A)
Acoustic noise
pA
uncertainty K = 3 db
L 74.6 dB (A)
WA
uncertainty K = 3 db
< 2,5 m/s
(2)
Vibrations a
h
PUMA-RR LYNX-RR
PUMA LYNX
series MINI
Ø 10-75 mm Ø 10-40 mm
32 kN 22 kN
2,7 kg (LYNX-RR)
2,6 kg (LYNX)
18 V
-15 °C to + 50 °C
maximum pressure valve
AGIP ARNICA 32 or equivalent
L = 65.1 dB (A)
pA
uncertainty K = 3 db
L 76.1 dB (A)
WA
uncertainty K = 3 db
2 2
uncertainty K = 1,5 m/s
GB
(1) Tests carried out in compliance with the EN 60745-1 Standard
indications:
L = A-weighted continuous acoustic pressure level in the work place.
pA
L = acoustic power level emitted by the machine.
WA
(2) The total value of the vibrations (triaxial vector sum) was measured
according to EN 60745-1 Standard indications and can be used for
tool comparison; the total vibration value can also be used in a pre-
liminary exposure assessment.
WARNING: Vibration in the actual use of the electrical tool may be
different from the declared value, depending on the method of use; in
order to protect the operator, safety measures must be identifi ed ac-
cording to the conditions of use, in order to protect the operator, based
on the estimated exposure under actual conditions of use.
- Rechargeable battery:
type: ................................................................. PLB18-20 (Li-Ion)
voltage / current / energy .........................18 V / 2.0 Ah / 36 Wh
- Fast battery charger:
model: .......................................................................... PFC30-36
voltage / current output ...................... 12 - 42 V
The tool is supplied with a specific battery charger with plug and power
supply according to the geographical area:
Geographical
area
EUROPE
UNITED KINGDOM
AUSTRALIA
NEW ZEALAND
USA/CANADA
NOTE: For correct use of the battery charger supplied with the tool, fol-
low the specifi c instructions for use and safety carefully, referring to mod.
ASC30-36.
1.1) Compliance of use
The tool is suitable for making pressed joints on all the most common
piped pressure systems for Water, Gas, Steam, Waste and HVAC.
The pressfi tting operation is carried out using special jaws (supplied
separately).
The part reference of the tool includes the following:
- Battery-powered hydraulic pressing tool.
- Rechargeable battery.
- Battery charger (differs depending on the geographical area).
- Shoulder strap.
- USB cable (PUMA-RR and LYNX-RR only).
- Storage case.
Based on the battery charger provided, part reference of the tool will be:
:
EUROPE PUMA PUMA-RR LYNX LYNX-RR
UNITED KINGDOM: PUMA-G PUMA-RR-G LYNX-G LYNX-RR-G
USA/CANADA: PUMA-A PUMA-RR-A LYNX-A LYNX-RR-A
AUSTRALIA / NEW ZEALAND: PUMA-I PUMA-RR-I LYNX-I LYNX-RR-I
Charger
Type power supply
27044000
27045000
220-240 V 50 - 60 Hz 85 W
27047000
27046000 115 V 60 Hz 85 W
6
/ 3,0 A max.