Asystems DMA8825 Manual Del Usuario página 10

DMA8825 / DMA8813 / DMA8425 / DMA8413
3. RM-6E PROGRAMMABLE REMOTE CONTROL
The Asystems RM-6E Programmable Remote Control
can be connected to the PERIPHERAL connector on
the rear of the DMA� The DIP switch on the RM-6E
determines which communication port the remote will
use (see configurations below). Up to 6 functions can be
programmed to be controlled remotely using the RM-6E.
See page 16 for more information�
1 2 3
PORT
DIP
4. WINDOWS-BASED PC
DMA8825, DMA8813, DMA8425 and DMA8413 can be controlled via a connected Windows-based PC.
1. Connect the Ethernet port of the DMA to the Ethernet port of your computer with a CAT5 RJ-45 Ethernet cable.
2. On your PC, right click your network icon and select
"Open Network and Sharing Center"�
4. Click "Properties"
English
4 5 6 7 8
button.
3. Double click your main connection located next to the
"Connections".
5. Select "Internet Protocol Version 4 (TCP/IPv4)" and
then click the "Properties"
8
button.