Reheating; Defrosting; Cancelling; Cleaning, Care & Maintenance - Buffalo CC910 Manual De Instrucciones

UK

Reheating

Should there be a need to reheat bread that has already been toasted:
Connect the appliance to a mains power supply.
1.
Press the 'REHEAT' button. The indicator light turns on.
2.
Insert the toast into the top of the appliance.
3.
Push the lever down.
4.
The appliance will begin reheating. When complete the toast is ejected.
Note: The'REHEAT' function is for a preset time and power level and cannot be altered
by the Level Selector dial.

Defrosting

Frozen bread should be defrosted before toasting.
Connect the appliance to a mains power supply.
1.
Press the 'DEFROST' button. The indicator light turns on.
2.
Insert the bread into the top of the appliance.
3.
Push the lever down.
4.
The appliance will begin defrosting. When complete the bread is ejected.
5.
Note: The 'DEFROST' function is for a preset time and power level and cannot be altered
by the Level Selector dial.

Cancelling

Any of the functions can be cancelled at any time by pressing the CANCEL button.
Cleaning, Care & Maintenance
• A BUFFALO dealer or qualified technician should carry out repairs if required.
• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
performing maintenance.
• If necessary wipe the exterior with a soft cloth and warm soapy water.
• Dry thoroughly after cleaning.

Crumb Tray

Periodically empty the crumb tray (located at the rear of the appliance).
Slide the tray out to empty.
Slot back in securely when replacing the tray.
3