HumanTechnik Triple-Bel Instrucciones De Servicio página 7

Congratulations on purchasing the Triple-Bel . We hope it will give
you many years of reassuring operation. Please read through
these operating instructions carefully.
Setting the count down timer:
Set the display to 0:00 by pressing the „h/m" and „m/s" buttons at
the same time.
Set the count down time by pressing the buttons „h/m" and „m/s".
Start the count down by pressing the „Start/Stop" button once.
(Pressing the „Start/Stop" button once again interrupts the count
down.)
The signal is activated after the set time is reached. (Signalling
light and/or vibration and/or acoustic signal).
Setting the count up timer:
Set the display to 0:00 by pressing the „h/m" and „m/s" buttons at
the same time.
Start the count up by pressing the „Start/Stop" button once.
(Pressing the „Start/Stop" button once again interrupts the count up.)
No signal can be activated in this operating mode!
Battery change
The Triple-Bel is operated with 2 alkali batteries (type AAA).
Open the battery compartment by pushing the cover into the
direction of the arrow (see drawing). Insert 2 batteries according to
the marking in the battery compartment.
English 7