Pressure-Pro PP3425H Manual De Instrucciones página 8

5.2.3 Buildings and Equipment
Task
General surfaces
Metallic equipment
These are merely several examples of cleaning tasks that can be solved by a pressure washer in association with
accessories and detergents. Each cleaning task is different. Please consult your local dealer or qualified representative
in order to discuss the best solution for your own cleaning tasks.
8
Accessories
Foam injectors
Standard lance
Tank cleaning
head
Disinfectant
Method
1. Apply thick foam over the surfaces to be cleaned.
Apply on dry surfaces. Apply from top to bottom on
vertical surfaces. Let the foam act for up to 30
minutes for the optimal effect.
2. Proceed with cleaning using the high pressure
lance. Use applicable accessories. Use high
pressure to dislodge large amounts of encrusted dirt
or grime. Use lower pressure and high water volume
in order to rapidly flush away loose dirt and rinse
surfaces.
3. Apply disinfectant once the surfaces are perfectly
clean.
Areas covered by amounts of loose dirt, such as animal
remains in slaughterhouses, can be removed by using
high water flow to flush away the dirt to evacuation pits
or drains.
Tank cleaning heads can be used to clean barrels, vats,
mixing tanks etc. Cleaning heads may be hydraulically
or electrically powered and give the possibility for
automatic cleaning without a constant user.