Before Running - PRECITEC POLYTEC MSA23.000 Manual De Instrucciones

4.

BEFORE RUNNING

Check the package whether it is damaged from outside before opening the product package. Open
cardboard, remove protective papers and foam casts. First, take the cardboard containing
accessories packed separately. These are :
- Fibre filter
- Z-Line cartridge filter
- Power cable
Then carefully take the device and remove foam cast beneath. Keep the original package and device
protective equipment for possible return.
Check the device for possible damages and control whether accessories are complete. In case any
damage occurred during sipping, we kindly request you to immediately contact shipper. Otherwise,
compensation claims shall be discharged.
Remove the protective folio on control panel. Place the filter heading into the vacancy on the
filter. Then, place the vacuum grid into the vacancy inside the plate.
Connect the mains cable provided into to hole at the rear side of the device and plug in.
The device is ready for use !
Polishing machines POLYTEC by PRECITEC® / MSA23.000 - MSA23.001 - MSA23.002 / User manual
We kindly request that the device is unplugged during installation
and equipping or equipment change and pay attention that green
switches are in "position zero".
Protect connection cables from heat and sharp edges and install
them in such a way that they will not get damaged. Make sure that
all connections are perfect when using cable extensions and check
electrical load and capacity before use.
21