switel BSW 120 Manual Del Usuario página 6

3 .
Setting up the camera and Internet connection
4
1. Launch the Easy iCAM App on your smartphone or tablet.
2. Follow the on-screen app instructions.
3. Setting up the camera name (SSID) or password:
The screen will show a message that reminds you to
change the Wi-Fi camera name (SSID) or password.
a. If you select "Yes", you can change the Wi-Fi camera
name or password. When you complete the setup of
camera name or password and tap the ok icon, the app
will ask you if you want to set up an Internet connection.
If you select "Yes", Internet setup will be started.
If you select "No", the camera will restart to change the
camera name and password automatically.
At this stage please make sure your smartphone or tablet
is connected to the camera because the camera name or
password is changed.
Note: The password must contain at least eight characters.
b. If you select "No", the app will ask you if you want to
set up an Internet connection.
4. Setting up an Internet connection:
The screen will show a message asking if you want to set up
an Internet connection.
a. If you select "Yes", the camera will scan for available
Wi-Fi networks in range. Tap the name of your Wi-Fi
network, and enter the password of your Wi-Fi router if
necessary. Then the first-time setup is done.
Note 1: If the camera cannot find the Wi-Fi network
b. If you select "No", the first-time setup is done.
Note: If you don't set up an Internet connection, you can
you want to connect to, please tap the scan icon to
rescan for available Wi-Fi networks.
2: If you complete the Internet setup successfully,
the power/status LED will glow green after
1 to 2 minutes.
only get live video feeds by connecting the camera
with your smartphone or tablet directly.
5