Klick® Connection; Battery Charger; Accessories - Klaxon KLICK electric Serie Manual De Usuario

5. Standard Handlebar
6. Battery
E. KLICK MINI STANDARD VARIANT / KLICK CARBON STANDARD VARIANT
Figure 70 shows the KLICK CARBON STANDARD device and identifies the elements that make it up.
1. Steering wheel and Motor group
2. Brake system
3. Kickstand
4. Standard Handlebar
5. Battery
9.2 KLICK® CONNECTION
See Figure 6.
A. CLAMPING RINGS
The clamping rings are the parts of the KLICK connection that always remain attached to the wheelchair frame (see Figure 7). Together with the
crossbeam, they must be installed on the wheelchair by authorised KLAXON personnel and must never be removed by the user during use. Various
clamping ring sizes and shapes are available to suit the different tubing diameters and types of wheelchair frames.
B. CROSSBEAM
Figure 8 illustrates a CROSSBEAM and identifies the elements that make it up.
1. CROSSBEAM
2. Square seats for insertion of the CONNECTOR
3. Fixing pins
4. Fastening and adjustment straps.
C. CONNECTOR (
wITh dETAIL OF PATENTEd
Figure 9 illustrates a STANDARD CONNECTOR and identifies the elements that make it up.
1. CONNECTOR lock/unlock lever
2. Mounting system in the CROSSBEAM (with ball-type lock)
3. KLICK device release button
4. KLICK® coupling (Worldwide Patented)
5. Seat of upper pin
6. Seat of lower pin.
d. TETRA CONNECTOR (
wITh dETAIL OF PATENTEd
Figure 10 illustrates a TETRA CONNECTOR and identifies the elements that make it up.
1. Velcro grip of CONNECTOR
2. Mounting system in the CROSSBEAM (with ball-type lock)
3. Easy release lever of the KLICK device
4. KLICK® coupling (Worldwide Patented)
5. Seat of upper pin
6. Seat of lower pin

9.3 BATTERY CHARGER

Figure 11 shows the battery charger that is supplied with the FLY SLIM (2.5 Ah), SLIM (5.8 Ah), FLY MINI (2.5 Ah), MINI (5.8 Ah), RACE (11 Ah) and FLY
RACE (5,8 Ah) batteries, which are compatible with the KLICK Electric Standard, Electric Tetra, Mini Standard, Carbon Standard, Race Standard, Race
Tetra and Monster Standard models.
Figure 12 shows the battery charger that is supplied with the FLY PLUS (2.5 Ah) and PLUS (11 Ah) batteries, which are compatible with the KLICK
Power Standard and Power Tetra models.

9.4 ACCESSORIES

KLICK can be equipped with various accessories. You may need to consult the appropriate User's Manual (ask KLAXON or visit our website:
klaxon-klick.com) for some of them.
A. QUICK RELEASE HANDLEBAR (FIGURE 13)
The purpose of this accessory is to be able to quickly move the handlebar from a "driving" position to a "rest" position so that it is not in the way of
the user's legs while coupling/releasing the device. This operation is controlled by the lever on the top of the stem.
1) Move the safety latch located above the release lever (Figure 14).
2) Raise the lever by releasing the handle as shown (Figure 15).
After doing so, you may:
- adjust the handlebar as you prefer and lock it in place by lowering the release lever (Figure 16)
- fully rotate the stem by putting the handlebar ahead of the stem seat (in this case it cannot be blocked by closing the lever - (Figure 17).
10
KLAXON Mobility GmbH - ENG
"KLICK® ")
SySTEM
"KLICK® ")
SySTEM
KLICK electric series Manual (ENG) - rev.6.3 of 25.05.2020
www.