System Requirements; Operating Environment; Technical Specifications; Camera Installation - König Electronic CMP-WEBCAM90 Manual De Uso

Before using the product
• PnP (Plug & Play) is only available in Windows
• To avoid damage to the image sensor please do not point it directly into sunlight.
• Please keep the camera away from heat to avoid electronic shocks.
• Please keep the camera away from rain and moisture, wipe the camera lens with soft cloth.
• Please do not disassemble the camera, as this will invalidate the warranty. Misuse or abuse may cause electric shock
and again will invalidate the warranty.

System requirements

®
• Intel Pentium 4 1.4GHz / AMD Athlon
• 128 MB RAM (or minimum OS requirement whichever is higher)
• 50 MB available hard disk space
• 16-bit color display adaptor
® ®
• Microsoft Windows
• CD-ROM drive
• DirectX 9.0C or above

Operating environment

• Temperature: 5°C – 40°C (41°F – 104°F)
• Relative humidity: 10% - 80%
• Illumination: 200 lux or more
Package contents
• Camera with USB cable
• Driver CD
• User manual

Technical specifications

Sensor
Resolution
Still image
Microphone sensitivity
Interface
Frame rate
Autofocus
OS platform

Camera installation

1. When using with Windows
®
Windows XP system does not have SP2, please update your operating system.
®
processor (2.4GHz processor recommended)
XP + SP2 / Vista / 7
2 Megapixel CMOS sensor
1600x1200 pixels
Up to 2560x2048 pixels
-44 dB
USB 2.0
30 fps (CIF mode), 30 fps (VGA mode),
10 fps (SXGA mode), 5fps (UXGA mode)
7 cm to infinity
®
Windows XP / Vista / 7
®
XP, please check your version. You mus have installed Service Pack 2. When your
ENGLISH
®
XP, Vista, 7.
2