Koenic KUC 2221 Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Operation
Ultrasonic cleaning without inserts
Fig.
Place the product on an even and stable
1
surface and plug in the power plug.
Put the to be cleaned object into
Fig.
2
the stainless steel container. Fill the
container with water. The object must
be covered by water, but ensure that
it does not exceed the Max. marking
of the container. Consider one of the
methods mentioned in Cleaning
Methods.
Close the lid and press the POWER
Fig.
3
button to switch on the product. The
blue indicator lights on and 00:00
appears on the display.
Set a time interval with the TIMER
Fig.
4
button.
Press the ON button to start and the
Fig.
5
time in the display counts down to 0.
Note
During the cleaning process a quiet vibration
noise can be heard; this is caused by the
cleaning process.
After the set time has elapsed the
Fig.
6
cleaning process is automatically
stopped and the display shows 00:00.
Press the POWER button to stop the
Fig.
7
cleaning process manually if necessary.
IM_KUC 2221_171024_V03_HR.indb 13
After the cleaning process has ended,
Fig.
8
turn off the product, open the lid and
take out the cleaned object.
Note
• You can repeat the cleaning process in
order to intensify the cleaning effect.
• In order to avoid lime residues, always
empty the stainless steel container and
wipe dry with a cloth. We recommend that
the liquid should be renewed after every
cleaning process.
Ultrasonic Cleaning with basket
Fig.
9
• Use the basket, if you clean
sensitive and small objects. Put the
item to be cleaned in the basket. You
can clean several items together in
one cleaning procedure. But ensure
that the items do not touch each
another in order to avoid scratches.
• Place the filled basket in the product
and fill in water. The water must
cover the items but not exceed the
Max marking.
• Start the cleaning process as
described in chapter Cleaning
without inserts.
Note
The basket insert absorbs some of the
ultrasonic waves and therefore reduces
the cleaning performance. It may therefore
be necessary to carry out several cleaning
procedures.
English
13
24/10/17 9:08 am

Publicidad

Tabla de contenido
loading

Tabla de contenido