Connecting To The Mains - Topcom CF-201 Manual De Usuario

Coral Fleece Electrical
• Do not use the heat blanket on children or persons who are disabled, a sleep or insensitive to heat.
• Make sure that the mains lead will not be in a position that could cause people to fall over it.
• The blanket has to be on top of the individual and not underneath them. Do not tuck it in around or under the person. It should
remain loose so as not to prohibit the user's movement.
• When using as an "Over Blanket" on a bed, it should be placed above a top sheet on top of the person and not under them on a
mattress.
• The blanket should be positioned so that the controller is within easy reach of the user. The controller must not be placed under
covers, pillows or quilt and not have any pressure on it.
• Never apply the blanket unsupervised.
• Prolonged use of the heating blanket at a high setting could lead to skin burns.
• Do not cover the blanket with any other cushions. The control switch should not be covered or placed on or below the blanket
while the unit is in operation.
• Should you have any concerns about health issues, consult your doctor before using the heat blanket.
• Do not use the appliance to heat animals.
• Do not use with other heating appliances.
WARNING - Risks of fire
• Do not activate the blanket when it is still packed in the box. Extensive heat can occur and cause fire.
• Do not place the heating blanket under inflammable objects, especially not under paper or curtains.
4 Description
The heating blanket is equipped with a digital controller unit.
– 1 - Five temperature level LED indicator
– 2 - Timer indicator (1 hour up to 8 hours)
– 3 - Power LED
– 4 - ON/OFF switch
– 5 - Cancel button: will switch off the heating
– 6 - Timer button: set the heating times (from 1 up to 8 hours)
– 7 - Temperature set button: select the temperature level (5 levels)
• Check that the control unit switch (4) is in the OFF-position (0) before connecting it to the mains
socket.
5

Connecting to the mains

• The heating blanket plug and mains plug are fixed to the control unit.
• Connect the heating blanket plug to the heating blanket connector.
• Connect the mains plug to the mains socket (230V AC/50Hz).
WARNING
The mains socket must be close and easy accessible.
6 Using the over blanket
Is is advised to preheat the electric blanket for 30 minutes before use.
• Switch the controller to the ON-position (1) & the power indicator LED (3) will illuminate.
• Push the temperature button (7) until all 5 temperature level LED's (1) are illuminated (Maximum heat). It takes at least 30 minutes to
get to maximum heat.
• Once it has reached maximum heat, you can alter the heat level by pushing the temperature key (7),
IMPORTANT
To prevent the blanket from getting too hot, the heat level will automatically reduce to a low heat level after being on maximum heat for
one hour. When the blanket is likely to be used for an extended period, it is suggested that the controller should be adjusted to low heat
level 1 or 2 (1 or 2 LED's illuminate).
Heating Blanket CF-201
2
1
1h
+
2h
+
4h 3
+
8h
7
4
6
5
4