Micropoint SD2 Manual De Uso página 4

SD2 - Installation Guide
(A) Socket for connection to the push button;
(B) Socket for connection to external power supply;
ATTENZIONE: You must follow carefully the instructions
in this manual before using product.
Installation: Secure the wall bracket and then fix the
display pressure. The length of the cable of the display
is about 2 meters. When you turn on the display per-
forms a test of digit shows the number 88.
Connect the jack of the next push button. Each time you
press the button, the display advances by one unit with
beeps and flashes. Holding down the button, the display
moves forward quickly.
NOTE: In case the fast advance exceeds the 30 numbers
the display device will reset automatically.
Examples of connection:
DIAGRAM - Display connected to the power supply and
to the push button.
cm), 220V cables (> 20 cm), power cables (> 20 cm),
etc.
p o r t u g u ê s i t a l i a n o e n g l i s h
CAUTION: Do not route cables near neon (> 20