Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cylinder
Clamp Screw
Step 5
Connect the drawer panel with the
tank holder support by using four
M6 x 14mm bolts. Attach both
strengthener supports to the drawer
panel and tank holder support by
using four M6 x 14mm bolts. Insert
cylinder clamp screw as shown.
Note: With the help of a friend, turn
the cart to its upright position.
Step 6
Pull out the sliding tracks on the
front and back panels to the furthest
position.
16
Publicidad
Capítulos
Tabla de contenido
