Initial Setup - Seiki SE26HQ04 Manual Del Usuario

Initial Setup
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator wilt illuminate.
• In Standby Mode, press the (,[,)button on the main unit or on the remote control to
turn the TV on. The red LED indicator wilt turn blue.
• The first time you turn the TV on, it will go into the Setup Wizard. Press 4/•
A/V buttons to select your desired mode and press OK to confirm.
O IB
0
Energy Star@ is a joint program of the U.S. Environmental Protection Agency and the
U.S. DepartiT_ent of Energy helping us aft save money and protect the environment
through energy efficient products and pratices.
Home Mode (Energy Saving) is the default as-shipped television configuration
and settings. And Home Mode (Energy Saving) is the setting in which the
product quafifies for Energy Star@. Any changes to default as-shipped television
configuration and settings would change the energy consumption. And enabling
certain optional features and functionalities may increase energy consumption
beyond the limits required for Energy Star@ quafification, as applicable.
• The ON-MODE Power under Home Mode should be less
than 31.7W.
• The SLEEP-MODE Powershouldbe less than lW.
10
0
0