NOTE:
• The higher the water pressure, the faster the water is
used up.
Initial Operation
1. Remove the oral irrigator from the charging station.
2. Attach a jet nozzle. Turn the jet nozzle so that the open-
ing faces the front of the appliance.
3. Open the water tank cover on the back side of the
appliance.
4. Fill the water tank with lukewarm water and close the
water tank cover again. Make sure the sealing ring is
fitted properly.
5. Select the "Normal" setting using the MODE button.
6. Turn on the appliance using the ON / OFF button.
7. Allow all water in the water tank to flow through the jet
nozzle in order to remove any residue.
8. Turn off the appliance.
9. Briefly rinse off the jet nozzles under running water.
Your oral irrigator is now ready for use.
Usage
Before using the water jet you should clean your teeth with
a toothbrush.
1. Open the water tank cover on the back side of the
appliance.
2. Fill the water tank with lukewarm water and close the
water tank cover again.
WARNING:
Do not fill it with hot water!
3. In order to clean the jet nozzles, allow water to flow
through the jet nozzle head (at maximum water pres-
sure) into the wash basin before and after each time the
appliance is used.
NOTE:
Do not hold the appliance at a too much slanting
angle otherwise no water will be able to spray from the
appliance.
4. Next, use the MODE button to select the desired setting
"Normal", "Soft", "Pulse").
5. Lean over the wash basin. Guide the water jet along the
gums, around the teeth. Hold the appliance upright as
far as possible. Clean all four parts of your mouth in this
way. Keep your mouth slightly open so the water can
leak out.
WARNING:
Do not hold the jet nozzle too close to your gums or
your teeth.
6. If the water becomes used up before you are finished
with the cleaning, turn off the appliance using the
ON / OFF button. Add more water.
PC-DC3031_IM
7. To stop operation, turn the appliance off.
NOTE:
For security, the appliance automatically turns off after
2 minutes.
8. Please clean the appliance as described under "Clean-
ing".
Cleaning
WARNING:
• Turn the appliance off. Remove the charging station
plug from the socket when you clean the appliance.
• Do not submerge the appliance and the charging sta-
tion in water. It could result in an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any sharp or abrasive cleaners.
1. Draw the water tank downwards.
2. If necessary, pour the remaining water out.
3. Clean the suction hose with a soft cloth.
4. Remove the filter and clean it carefully using warm
running water.
5. Insert the filter in the hose once again.
6. Rinse out the water tank.
7. Guide the hose into the upper opening of the water tank.
8. Place the water tank in the appliance once again. Pay
attention to the guides and make sure the sealing ring
is fitted properly. The water tank must snap into place
audibly.
9. Press the release button and remove the jet nozzle.
Clean the jet nozzle under running warm water. Dry the
jet nozzle.
10. Clean the appliance and the charging station with a
damp cloth. Finally, wipe the parts until they are dry.
Technical Data
Model:................................................................. PC-DC 3031
Net weight: ........................................................ approx. 622 g
Degree of protection against liquids: .............................IPX7*
Charging station
Protection class: ...................................................................
Power supply:.....................................100 - 240 V~, 50 - 60 Hz
Power consumption: ...............................................1.2 - 2.8 W
Toothbrush accumulator: ............ 1 × 3.7 V, 650 mAh Li-Ion
Running time: ..................................................4.5 hours max.
Charging time: ..............................................approx. 24 hours
Oral irrigator accumulator: ........ 1 × 3.7 V, 1500 mAh Li-Ion
Running time: ............................................... 60 minutes max.
Charging time: ..............................................approx. 24 hours
* This appliance complies with IPX7. This means that the
appliance is protected against temporary submersion.
47
14.09.18