Before The First Use - Domo DO7087S Manual De Instrucciones

Plancha con generador de vapor
Ocultar thumbs Ver también para DO7087S:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
DO7087S
Steam light
When you turn on the device, the steam light will remain unlit. As soon as the device
has preheated, the steam light will light up blue, indicating you may start ironing.
Steam release button
When the light indicator lights up blue, you can start using steam. Press the steam
release button on the inside of the handle of the iron to spray a continuous steam out
of the soleplate. When you let go of the button, you will iron dry again, without steam.
Descaling cartridges
We advise you in changing the descaling cartridges each time you've spent 9 hours
using the device. In order to replace the descaling cartridge, you need to remove the
water tank and remove the old cartridge and insert a new one in the same place.
Attention: A new descaling cartridge is best left soaking in a small container of water
for an entire night. This ensures it's wet enough to allow you to iron immediately after
changing the cartridges out.
Cord clamp
After use you can easily store the cord and steam hose by using the cord clamp. Pull
out the clamp, lead the steam hose and the cord around the steam generator and push
in the clamp to lock the cord and steam hose.
TEMPERATURE DIAL
Set the right temperature for the right fabric with the temperature dial.
For synthetic fabrics/silk:
For wool:
For cotton:
For linnen:

BEFORE THE FIRST USE

1. Remove any stickers or protective foil from the ceramic soleplate.
2. Heat up the iron until the maximum temperature and iron on a damp cloth during
a couple of minutes to remove any possible residues from the soleplate. Iron
according to the instructions in the section «Steam ironing».
Caution:
During the first use it is normal that a specific odeur escapes from the appliance.
This odeur will disappear after a while.
Some particles may come out of the soleplate during the first use. This is normal.
The particles are harmless and will disappear after a while.
When turning on the appliance, the steam generator may produce a pumping
70<T<120°
100<T<160°
140<T<210°
170<T<225° MAX
44

Publicidad

Tabla de contenido
loading

Tabla de contenido