Included In The Kit; Battery Installation; Refill Installation - Walter SURFOX Test Manual Del Usuario

SURFOX Test

1.3 Included in the kit

SURFOX TEST electrochemical
u
tool (1);
Batteries of 1.5V (9), qty: 3
u
Refill – manganese reagent (5),
u
qty: 1
Strap (7), qty: 1
u
Blotting papers (11), qty: 100
u
Molybdenum reagent 100 ml (12),
u
qty: 1

2. Battery installation

1. Unscrew the metal cap (2) of the battery's place with a flat screwdriver or
with a coin.
2. Put inside the batteries (three AA size alkaline batteries of 1.5 V), with the
positive pole down, as indicated on page 4 (9) and screw the metal cap (2).

3. Refill installation

Handle with care: The refill (5) is filled with a manganese reagent electrolyte
(irritant solution for skin).
1. Unscrew the plastic cap (3) of the refill's place with a flat screwdriver or with
a coin.
2. Attach on the refill (5) the spring (10) and then put the refill inside its place
with the white tip down.
3. Screw the plastic cap (3).
Note: Seal the refill (5) inside the tester using the plastic cap (2), in order to
reduce the evaporation of the electrolytic solution contained.
6
Sample of stainless steel AISI
u
200 series, qty: 1
Sample of stainless steel AISI
u
304 series, qty: 1
Sample of stainless steel AISI
u
316 series, qty: 1
Sample of stainless steel AISI
u
400 series, qty: 1
Operating manual
u