Tools Required - Craftsman ZT 7000 Manual Del Operador

Nota: Una traducci6n en espaSol de este Manual del Operador puede encontrarse en la pAgina 10.
Warranty Statement ..................................................... 2
Safety Rules & Information for Bagger ..................... 3
Operating Instructions for Bagger ............................. 4
Initial Assembly & Installation .................................... 5
Normal Installation & Removal ................................. 10
Spanish Operator's Manual ...................................... 12
Repair Parts ......................................................... PTS-1
Hardware Identification &
Torque Specifications ................... Inside Back Cover
Service Telephone Numbers .................... Back Cover
ONE YEAR FULL WARRANTY on CRAFTSMAN 2-BIN BAGGER
For one (1) year from the date of purchase, if any parts of this product are defective in material or workmanship,
Sears will repair or replace them free of charge.
THIS WARRANTY DOES NOT COVER:
• Bagger cloth bags which are expendable and wear out with normal use.
• Repairs necessary because of operator negligence, including but not limited to, failure to maintain the equipment
according to the instructions contained in the operator's manual.
• Bagger if used for commercial or rental purposes.
WARRANTY SERVICE IS AVAILABLE BY RETURNING DEFECTIVE PARTS TO THE NEAREST SEARS PARTS &
REPAIR CENTER IN THE UNITED STATES.
FOR THE NEAREST SEARS PARTS & REPAIR CENTER LOCATION, CALL 1-800-4-MY-HOME ®.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
HARDWARE BAGS
Description Quantity
BAFFLE HARDWARE
Carriage Bolt, 5/16-18 x 5/8 7
Locknut, 5/16-18 7
BAGGER HARDWARE
Carriage Bolt, 5/16-18 x 5/8 2
Locknut, 5/16-18 2
Bracket 1
Pin, Clevis 4
Washer, 1/2 4
Pin, Hair 4
Nut, Hex, 1/2-13 1
Capscrew, Hex, 1/2-13 x 1-1/4 1
Washer, 3/8 4
Locknut, 3/8-16 4
Capscrew, Hex, 3/8-16 x 2 4
TOOLS REQUIRED
Description Quantity
1/2" Wrench 1
9/16" Wrench 2
3/4" Wrench 2
See Page 25 for Wrench and Fastener Size Guide.