Huion KAMVAS Pro 24 Manual De Usuario página 6

EN
2.3 Setting Up Display
[1] Take out the pen display and stand from the package, then assemble the stand
to the back of the display with attached screwdriver according to the following
instruction.
①
③
[2] As shown on the below, connect the pen display to your computer with
attached power adapter, HDMI cable and USB Cable.
[3] Press the power button on the bottom of the display to power on the display.
②
④
Power Cable
HDMI Cable
Adjust the stand angle
by dragging this switch
① ②
③ ④
Power Adapter
USB Cable
6
GT-240
Power Button