Panasonic CY-BT100U Manual De Instrucciones página 27

Problem
Failure to pair a
mobile phone
The mobile phone
cannot be
automatically
connected.
Possible cause
There is the other wireless equipment near the unit.
●
Switch off the other wireless equipment or keep it away from these bluetooth
units.
The mobile phone (or main unit) is touched or covered by metal objects. Or the mobile
phone is hidden or far from the main unit.
●
Move the mobile phone (or main unit) away from metal objects or from the hiding
position.
Consult your dealer to move the main unit.
✽
The mobile phone is not HFP (Hands Free Profile)-ready even it is Bluetooth-ready.
●
Use an HFP-ready and Bluetooth-ready mobile phone in consideration of each
version.
The Link key of this unit is different from the Link key of the mobile phone.
●
Delete "CY-BT100" from the mobile phone pairing list, and try pairing again.
Some mobile phone models fail to connect automatically via Bluetooth.
●
Once turn off the power of the mobile phone and turn on the power again.
If Bluetooth connection is not successfully established, delete "CY-BT100" from the
✽
mobile phone pairing list, and try pairing again.
Possible solution
a
27