Alcad 2637030 Manual De Usuario página 11

VIDEODOOR ENTRY SYSTEM MONITOR ENG - 11
Intercom call
If there are several monitors in the dwelling, it is possible to make an internal intercom call.
To do this, while the system is on standby press the communication button ( ) of one of the
monitors: all the other monitors will emit beeping sounds. The call is answered by pressing
the communication button ( ) on one of the other monitors. You have 30 seconds to answer.
When the communication button ( ) is pressed, communication is established with the person
who is calling. Conversation time is limited to 60 seconds. You can prolong the conversation
time by pressing the conversation button ( ) twice. The conversation will end when the
communication button is pressed once, or when the conversation time runs out. The system
will then revert to being on standby.
Intercom call
TURNING ON THE AUTO SWITCH-ON SYSTEM
Push the auto switch-on button You will be able to see the image captured by the camera,
open the street door, and establish communication with the entrance panel.
If any monitor is active, you will not be able to use automatic switch-on. In such a case, wait
until the system is free again.
Time of
Time of
auto switch-on
auto switch-on:
Maximum time limit:
60 seconds
30 seconds
Auto switch-on
The calls from the entrance panel have priority over the auto switch-on system. If a call is
made from the entrance panel during the time of auto switch-on, the video of your monitor
will switch off, and the monitor will change to stand by status automatically, ensuring the
privacy of the call.