Care & Maintenance; Technical Specs - VTech KidiHeadphones Manual De Instrucciones

UK
5. HEADBAND ADJUSTMENT
• The headband can be adjusted by gently pulling the
headphones away from the headband.
6. DETACHABLE EAR CUSHION
• The ear cushions can easily be
removed. To reattach, place over
the top part of the headphone and
twist clockwise.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and heat source.
3. Do not drop the unit on hard surfaces and do not expose the unit to moisture
or water.
TROUBLESHOOTING
If for some reason the heaphones do not work, please check the headphones
are plugged in to the source correctly.
If the problem persists, please call our Consumer Services Department at
01235 546810 (from UK) and +44 1235 546810 (outside UK), and a service
representative will be happy to help you.

TECHNICAL SPECS

Product Impedance: 32Ω Max. Input Power: 100mW
Sensitivity: 85dB +/-3dB (1KHz SPL)
Wide band characteristic voltage ≥ 75mV.
IMPORTANT NOTE
Creating and developing VTech products is accompanied by a responsibility that we
take very seriously. We make every effort to ensure the accuracy of the information
which forms the value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and encourage you
to call our Consumer Services Department on 01235 546810 (from UK) or +44
1235 546810 (outside UK) with any problems and/or suggestions that you might
have. A service representative will be happy to help you.
4