Specific Safety Instructions - stayer GID1000 Manual De Instrucciones

1. Contents
2.Specific safety instructions......................................22
3.Instructions for use....................................................23
3.1 Placement Tool.............................................................23
3.2 Electrical connection.....................................................23
3.3 Generator start.....................................................23
3.4 Output Indicators and overload.............................23
3.5 Battery charging...................................................23
3.6 Illustrated description............................................24
3.7 Limitations of environmental conditions................24
4.Operating instructions..............................................24
4.1 Placement and testing..........................................24
4.2 Start 4T.................................................................24
4.3 System Low oil warning.........................................24
4.4 AUX output 12V.....................................................24
4.5 Overload...............................................................24
4.6 Stopping the engine.............................................24
4.7 Electrical installation...........................................24
4.8 Location and Troubleshooting...............................25
5.Maintenance and service instructions.....................25
5.1 Maintenance Schedule.........................................25
5.2 Lubricating oil.......................................................26
5.3 Oil change............................................................26
5.4 Fuel......................................................................26
5.5 Air filter..................................................................26
5.6 Air Filter Maintenance...........................................26
5.7 Maintenance of the spark plug...............................27
5.8 Transport and storage..........................................27
5.9 Equipment storage...............................................27
5.10 Repair service...................................................27
5.11 Warranty...........................................................27
5.12 Disposal and recycling......................................27
6.Regulations................................................................28
6.1 Technical Data......................................................28
6.2 EU declaration of conformity.................................28

2. Specific safety instructions

The generator is designed to give safe and dependable
service if operated according to instructions.
Read and understand the Owner's Manual before
operating the generator. Failure to do so could result in
personal injury or equipment damage.
Exhaust gas contains poisonous carbon monoxide. Never
run the generator in an enclosed area. Be sure to provide
adequate ventilation.
The muffler becomes very hot during operation and
remains hot for a while after stopping the engine. Be careful
not to touch the muffler while it is hot. Let the engine cool before
storing the generator indoors. To prevent scalding, pay attention
to the warning marks.
Gasoline is extremely flammable and explosive under
certain conditions. Refuel in a well ventilated area with the
engine stopped.
Keep away from cigarette, smoke and sparks when re-
fuelling the generator. Always refuel in a well ventilated
location.
ENGLISH
22
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
page
lead to loss of control over the power tool.
Wipe up spilled gasoline at once.
Connections for standby power to a building's
electrical system must be made by a qualified
electrician and must comply with all applicable laws
and electrical codes. Improper connections can allow
electrical current from the generator to back feed into the
utility lines. Such back feed may electrocute utility company
workers or others who contact the lines during a power
outage, and when utility power is restored, the generator
may explode, burn, or cause fires in the building's electrical
system.
Always make a pre-operation inspection before you
start the engine. You may prevent an accident or
equipment damage.
Place the generator at least 1m (3ft) away from
buildings or other equipment during operation.
Operate the generator on a level surface. If the generator
is tiled, fuel spillage may result.
Know how to stop the generator quickly and
understand operation of all the controls. Never permit
anyone to operate the generator without proper
instructions.
Keep children and pets away from the generator when
it is in operation.
Keep away from rotating parts while the generator is
running.
The generator is a potential source of electrical shocks
when misused; do not operate with wet hands.
Do not operate the generator in rain or snow and do not
let it get wet.
To prevent electrical shock from faulty appliances, the
generator should be grounded. Connect an electric
conductor (cable) of at least 1.5mm² between the
generator's ground terminal and an external ground
source.
Limit operation requiring maximum power to 30
minutes. For continuous operation, do not exceed the
rated power. In either case, the total wattage of all
appliances connected must be considered.
Do not exceed the current limit specified for any one
receptacle.
Do not modify or use the generator for other purpose
than it is intended for. Also observe the following when
using the generator:
- Do not connect generators in parallel.
- Do not connect an extension to exhaust pipe.
- When an extension cable is required, be sure to use a
rubber sheathed flexible cable.
22