Product Introduction; Setting Up The Charger; Operation Instructions - ToughTested TT-WC-PAD Manual De Usuario

PRODUCT INTRODUCTION

04
Silicone pad
LED indicator
Micro USB input

SETTING UP THE CHARGER

• Connect the wireless pad to a USB car charger or to a USB wall charger using the micro USB cable.
A standard 5V/2A (10W) charger will support 5W wireless charging.
A Quick Charge 2.0 or 3.0 charger will support 5W, 7.5W Apple fast charge and 9W Samsung fast charge.
• The LED will turn red to indicate it is receiving power and the pad is ready.
WIRELESSLY CHARGE A SMARTPHONE
• Place your phone on the pad
• Your phone should indicate it is charging. If it does not, reposition the phone on the pad.
• The LED on the front of the charge pad will turn green and remain on while the phone is charging
• The LED on the front of the charge pad will turn off and remain off when the phone is fully charged

OPERATION INSTRUCTIONS

05