Speedlink Invader Manual Del Usuario página 4

1 Introduction
D D
Thank you for purchasing the INVADER Gamepad. This gamepad
GB
has been especially adapted to the users' demands and is perfectly
suited for usage with all IBM compatible PCs. The ergonomic button
F
layout permits a comfortable game experience under Windows 98/
2000/ME/XP .
E
I
2 System requirements
•Pentium 300 MHz or higher
•USB port
•Microsoft Windows 98/2000/ME/XP
3 Characteristics
•Eight fire buttons
•Digital eight-way-d-pad
•Turbo button
•Analog control stick
•Ergonomic design
4 Hardware Installation
1.Connect the Invader gamepad to the USB port or USB hub of
your PC and make sure it's firmly connected.
2.After having connected the INVADER gamepad the hardware
wizard will appear on your screen. A Windows driver will be
installed automatically. Now your gamepad is ready for use.
3.Possibly the following message appears on your screen:
„Search for a suitable driver for my device (recommended)".
Click on „Next". If you are asked to insert Windows installation
CD, follow instructions on the screen. In case an error
message appears, please click on „OK", after having
6
inserted the Windows CD. In the opening window choose
c:windows/system32/drivers/hidsys", possibly a new error
message appears, in this case please choose:
"c:windows/system/joysys". Please follow instructions on the
screen.
5 Gamepad configuration
After hardware installation Windows® will find your USB device
automatically. To configure your gamepad follow steps listed below:
1. Choose „Start\Settings\Control Panel\Game controller
(or „Gaming options" under Win ME).
2.Click on "Properties" and choose "Calibrate".
3. For calibration of all buttons and functions:
a) Press any button of your gamepad.
b) Adjust radius of movement: Move d-pad two or three
times in different directions and press any button.
c) Confirm centre position of d-pad by pressing any button.
After calibration click on "Finish" to change to the tab
"Properties".
d) Click on "Test". Move d-pad in all directions and press all
buttons to test all settings. If all settings function correctly,
click on „OK". (If the controller is not functioning properly, it
may need to be calibrated again.)
e.) You have successfully calibrated your gamepad. To save your
gamepads calibration, click „Finish".
Attention:
If your gamepad doesn't function correctly, although it's firmly
connected, choose:
„Start/Settings/Control Panel/Game controller (Gaming options
7
D
D
GB
F
E
I