Cleaning And Maintenance - Hantech GREE GPC07AK-K5NNA1A Manual De Instrucciones

CLEANING AND MAINTENANCE

Warning:
Before cleaning the air conditioner, always switch off the device and disconnect the
power. Danger of electric shock!
Caution: Do not tilt the device, keep it always
horizontal.
Outer case and grille
Clean outer case with a soft cloth. If necessary
use neutral cleaning agent to wipe it. Never
use volatile liquids or scouring powders. Clean
the grille with a soft brush.
Clean filter
Open the cover and remove the filters.
Clean the filters with warm water and neutral
cleaning agent. Let it dry thoroughly before
reinserting it. Do not expose to heat to avoid
deforming.
Removing collected water
When using the drainage from the bottom hole
(see Installation):
• Take the drainage pipe from the clip and pull
out the plug.
• Discharge the collected water into a suitable
container, put back the plug into the drainage
pipe and fix the pipe on the clip.
• Wait for approx. 3 minutes before restarting
the device.
Clean heat discharge pipe
Push the fixing clasp back and pull joint c out
of the groove. Remove the pipe, clean it and let
it dry thoroughly before reinstalling it.
EN | 35