Adjust Volume - RuarkAudio MR1 Manual De Instrucciones

4 Setup
1
Position speakers
For best stereo reproduction, place left and right
speakers no less than 60cm (24in) apart with
the speaker with volume control on the right.
Avoid having objects in front of the speakers and
also ensure the underside of each speaker is
unobstructed.
2
Connect speakers together
Connect the two speakers with the interconnect
cable (5), inserting one end into the output (13) on
the right speaker and the other end into the input
socket on the left speaker.
3
Connect to AC power
Fit the correct plug (4) for your region to the mains
power supply. When you fit the plug adapter, it will
"click" into place.
Connect the DC cable from the power supply to the
DC power socket on the back of your MR1.
Plug the AC power adapter into a mains power
socket.
CAUTION: do not plug the AC power cord into the
mains until all other connections are made.
EN-6
RA MR1 User Guide.indd 6
4
Turn on your speakers
When you connect the speakers to mains power
they will power up in standby mode. To turn them on,
press the control knob (8) on the right speaker or the
standby button (18) on the remote; the source status
indicator (9) glows solid amber showing that Line-in
audio input is selected.
5

Adjust volume

Turn the volume control knob (8) clockwise to
increase the volume, anticlockwise to decrease it or
use the volume buttons (21) on the remote. When
you reach the maximum or minimum volume, the
status indicator (9) goes off temporarily.
6
Standby
Press and release (short press) the control knob (8)or
press the standby button (18) on the remote.
31/03/2015 09:46:42